seatbelt, seat belt, OSHA, safety belt, Britain's Health and Safety Commission, HSC, Health and Safety Executive, HSE, mining safety, springbelt, Caterpillar, John Deere, CASE, earth moving, safety, Worksafe, osha seat belt, construction equipment, heavy equipment, crawler tractors, wheel loaders, dozers, scrapers, excavators, cranes, trenchers, aggregate, asphalt paving, highway equipment, parts, attachments, heavy construction machines, Cat, Komatsu, Case, John Deere, Volvo, Kawasaki, Hitachi, Link-belt, Terex, Grove, Dresser, Ingersoll-rand, backhoe, bulldozer, compaction



Seatbelts for forklifts, mining, quarrying, construction, earthmoving, forestry and agriculture.
Available in 2" / 50mm and 3" / 75mm models.
SAFE T BELT protects both employees and employers
.
Safe T Belt is the seat belt solution for industrial vehicles around the world.



The combination of its unique ergonomic design matched with the electrically switching buckle ensures seat belt
compliance by operators regardless if they are under direct supervision or working solo.
Matched with a generous webbing retractor in 50mm or 75mm high visibility webbing, the SAFE T BELT will
accommodate the largest operator, including operators wearing equipment such as re-breathers.
Ensuring that your employees wear a correctly fastened seatbelt is one of the most significant changes an employer can
make to any safety program involving forklift truck or mobile plant in a short period of time.
Safety is the legal responsibility of the employer and Safe T Belt is your partner in achieving that objective.
 

Ensuring that your employees wear a correctly fastened seatbelt is most probably one of the most significant changes you, as an employer, can make to any safety program involving forklift truck or mobile plant in a short period of time. Safety is the legal responsibility of the employer.


Download the brochure now!!! 

 Check out the videos below of accidents that DID happen..

          

Fitting a Safe T belt is a matter of life and death

Whether it’s because they can’t be bothered, find them unnecessary or they wrongly think it’s safer to try and jump free in an emergency, the fact is that many operators don’t fasten their seat belts, often with tragic results.

That’s why we felt compelled to develop a more practical alternative. It’s called the Safe T belt  because as you can see, it springs up when unbuckled making it a real nuisance and uncomfortable to operate the machine or mobile plant.

Then when it’s buckled, it holds the operator firmly, comfortably and safely in his seat. A universal fitting kit makes it easy to install SAFE T BELT in all common types of mobile machinery.

1.   A real nuisance when unbuckled 
2.   Comfortable and safe when buckled 
3.   Easy to install 
4.   Fits all common types of mobile machinery 
5.   Can also be fitted with ignition lock-out features 

Why a Safe T Belt and not a normal seatbelt?  Click here to view why...

A normal seatbelt if correctly fastened will lock a drivers hips in a forward position, which is comfortable for operators travelling forward however a forklift operator in particular will spend approximately half his time travelling in reverse and the other half in a forward direction.

SAFE T BELT allows the operators the freedom of movement they require while at the same time keeping them safely restrained in the vehicle in the event of an accident.

Sits over the operators lap like a protective halo

Safe T Belt springs up when unbuckled

 We already have seat belts on our equipment. 
If operators are not wearing the belts provided and this cannot be enforced then what good are the belts when an accident occurs?

If there is an incident where the driver expects a tip over is going to occur Safe T Belt will keep the driver inside the cabin, where statistics prove there is a greater chance of surviving.

Safe T Belt can be locked into a position so that it springs erect and becomes a nuisance to the operator if he is not wearing it while positioned in the drivers seat.

Safe T Belt will overcome the major objections from drivers that it is too uncomfortable to wear their safety belts while performing their duties in a expedient manner.

The bottom line where seat belts are concerned...

World-wide, forklift tip-overs and roll-overs account for about 25 percent of all serious forklift related injuries.

Safety is the legal responsibility of the employer. 

The employer is liable for inadequate safety.

Safe T Belt fits all common types of mobile machinery and on average would take less that 30 minutes to install and be immediately operational.

ISO-6683 is the Australian Standard for aftermarket replacement seat belts and will conform with any vehicle.

 

 

Safe T Belt complies International Standards ISO-6683, SAE-J386 and FMVSS-302 for the market in the USA.

Safe T Belt can be used with all industrial vehicles, mining and earth moving plant as well as agricultural vehicles such as tractors or harvesters.

Optional extras are electrically switching buckles.
This allows management to perform LOCKOUT functions on the vehicle.

If the
Safe T Belt is wired into the vehicles ignition the driver will not be able to start the vehicle until he has his seatbelt correctly fastened.
If the electronic transmission is locked-out,  forward / reverse gears are denied to the driver UNTIL he / she   fasten their belt in the correct manner.

Electronic transmissions are a common feature on most industrial vehicles and plant manufactured in the last 15 years.

Available in 50mm HI-VISIBILITY webbing or in a 75mm black webbing version the Safe T Belt  will accommodate the largest of drivers in comfort and safety.

To find out more information or view online videos of the Safe T Belt or other seatbelt products in the Switched On range please visit our website www.safetbelt.com  .

For sales and information contact Switched ON.

Switched On I & T Services

Factory 5 / 92 Malcolm Road
Braeside, Victoria, Australia  3195 
Phone +61 03 9587-1150 
Fax +61 03 8080-1773
Web site  www.switchedon.com.au
Email: sales@switchedon.com.au


 



Reasons to make sure why your drivers should wear their seatbelts.

 

CATERPILLAR , DEERE , CASE , KOMATSU , HITACHI , GROVE , LINK-BELT , TEREX , DRESSER , INGERSOLL-RAND, ALLIS-CHALMERS , AMERICAN , ATLAS COPCO , BARBER-GREENE , BLAW-KNOX , BOBCAT , BUCYRUS-ERIE , CEDARAPIDS , CHAMPION , CLARK , DAEWOO , DITCH WITCH , DROTT , DYNAPAC , EUCLID , FIATALLIS , FORD , GALION , GRADALL , HYSTER , INGRAM , INTERNATIONAL , JCB , JLG , KAWASAKI , KOBELCO , KOEHRING , LIEBHERR , LORAIN , MANITOWOC , MASSEY-FERGUSON , MICHIGAN , MITSUBISHI , NATIONAL , NEW HOLLAND , P & H , RAYGO , SAMSUNG , TAKEUCHI , TIMBERJACK , VERMEER , VOLVO